Technical Education Quality Improvement Programme

Welcome Page

>>

SGGSIE&T, Nanded is selected under TEQIP-III (1.3)

Motivation

•During 1980s, the Government of India and the State Governments had felt the need for revamping the Technician Education System in the country.

•The Government of India supported 25 State Governments and Union Territories of Andaman & Nicobar Islands and Puducherry through three Technician Education Projects during 1991-2007, financed by the World Bank, which helped to strengthen and upgrade the system and benefited 552 polytechnics.

•The success of these projects encouraged the Government of India and the State Governments to seek more funding from the World Bank for systemic transformation of the Technical Education System with focus on Degree level Engineering Education.

•In 2002-03, the Government of India with financial assistance from the World Bank launched a Technical Education Quality Improvement Programme (TEQIP) as a long-term Programme, to be implemented in three phases for systemic transformation of the Technical Education System.

The first phase of TEQIP : (March 2003-March 2009), benefited 127 institutions in 13 States.

The second phase of (TEQIP-II): (June  2009 - 31st July 2017)

The TEQIP-II was designed to meet following objectives:

  • Strengthening Institutions to produce high quality Engineers for better Employability
  • Scaling-up Postgraduate Education and demand-driven Research & Development and Innovation
  •  Establishing Centers of Excellence for focused thematic research
  • Training of Faculty for effective Teaching
  •  Enhancing Institutional and System Management effectiveness
  • Capacity Building to Strengthen Management

A total competitively selected 191 engineering institutions are extremely benefited under TEQIP II also 30 Centres of Excellence have been established to cultivate thematic research in various emerging areas of engineering & technologies.

•Realizing the potential of socio-political and economic benefits from Higher Education in transforming India into a knowledge superpower, the Government of India has introduced the Third phase of Technical Education Quality Improvement Programme (referred to as TEQIP-III).

A special consideration for

  • Low Income States and Special Category States and
  • Support  to strengthen few affiliated technical universities.

Objectives:

(a) Improving quality and equity in engineering institutions in focus states viz.   07 Low Income States (LIS),  08  States in the North-East of India, 03 Hill states viz. Himachal Pradesh, Jammu & Kashmir, Uttarakhand and a union territory (UT) Andaman and Nicobar Islands

(b) Affiliating Technical Universities (ATUs) : System-level initiatives to strengthen governance and performance to improve their policy, academic and management practices towards affiliated institutions, and

(c) Twinning Arrangements to Build Capacity and Improve Performance of institutions and ATUs participating in focus states.

Project Scope:

Only the Government and Government aided AICTE approved Engineering institutions/Engineering faculty/Engineering Teaching Department/Constituent Institutions of Universities/Deemed to be Universities and new centrally funded institutions in SCS will be the part of the project.

Around 200 Government and Government funded Engineering institutions including Affiliating Technical Universities (ATUs) are selected under different sub-components.

Shri Guru Gobind Singhji Institute of Engineering & Technology, Nanded  is selected under 1.3 sub component as

MENTOR INSTITUTE  for

College of Technology,

Govind Ballabh Pant University of Agriculture and Technology,

Pantnagar, Uttarakhand.

Procurement

TENDERS (NCB)

The Shri Guru Gobind Singhji Institute of Engineering & Technology, Nanded now invites sealed bids from eligible bidders for supply of Packages listed below.

Bid document can be downloaded from the institute website. Downloaded bids should be submitted along with DD of Rs. 2000/- in favour of The Director, Shri Guru Gobind Singhji Institute of Engineering & Technology, Nanded, Payable at Vishnupuri, Nanded.

Package Name

Bid Document Sale Start Date

Bid Document Sale End Date

Prebid Meeting Date

Last Date of Submission of dully filled Bid Document

BID Document

PROD_Micro machining set up

25.03.2013- Time  11:00Hrs.

25.04.2013

Time 13:30Hrs.

18.04.2013

Time 12:30Hrs.

26.04.2013

Time: 15:00 Hrs

Click_here(doc)

Clickhere(pdf)

INST_Distributed control system set up

25.03.2013

Time  11:00Hrs

25.04.2013

Time 13:30Hrs.

18.04.2013

Time 11:00Hrs.

26.04.2013

Time: 15:00 Hrs

Click_here(doc)

Clickhere(pdf)

INST_Bio Monitor Data Acquisition and Signal Analysis System

25.03.2013

Time  11:00Hrs

25.04.2013

Time 13:30Hrs.

18.04.2013

Time 11:00Hrs.

26.04.2013

Time: 13:00 Hrs

Click_here(doc)

Clickhere(pdf)

Institute_UPS

25.03.2013

Time  11:00Hrs

25.04.2013

Time 13:30Hrs.

18.04.2013

Time 11:30Hrs.

26.04.2013

Time: 14:30 Hrs

Click_here(doc)

Clickhere(pdf)

Institute_Computers

25.03.2013

Time  11:00Hrs

25.04.2013

Time 13:30Hrs.

18.04.2013

Time 13:00Hrs.

26.04.2013

Time: 15:00 Hrs

Click_here(doc)

Clickhere(pdf)

·     1News Paper Advertisement: Download here       2. PRE-BID MEETING Minutes : Download Here

SHOPPING

Current Invitations
Package No Name` Last Date Quotation Invitation Specification
71 Mech_Inverted Metallurgical microscope  22/04/2019 View Invitation View
70 Mech_Injection Molding Machine 22/04/2019 View Invitation ---
75 Textile_stelometer 29/04/2019 View Invitation ---
74 Tensile_Electronic yarn twist tester 29/04/2019 View Invitation ---
73 Digital fabric strength tester 29/04/2019 View Invitation View
72 Tensile tester for Textile dept 29/04/2019 View Invitation View
08 Furniture for Extc Dept    30/03/2019 View Invitation View
15 PROD_Measurement lab 31/01/2019 View Invitation ---
66 Text_ electronic yarn twist tester 04/02/2019 View Invitation ---
64 Text_Digital Fabric strength tester 31/01/2019 View Invitation ---
65 Text_Digital Lea strength tester 05/03/2019 View Invitation ---
63 Text_Stelometer 04/02/2019 View Invitation ---
25 Text_Tensile tester 31/01/2019 View Invitation ---
62 Text_Thrash analyser 31/01/2019 View Invitation ---
Services: Invitation for Internal Auditor: EoI Download (Last Date: 31st August 018) SHOPPING UNDER TEQIP
CURRENT INVITATIONS: Package No.:44 :  LCD Projector : Last  submission Date and Time : 03 July 2018, 13:30 : Download Quotation:  Package No.:45PA System      : Last  submission Date and Time: 04 July 2018, 13:30 : Download Quotation:  Package No.:46 : Set-Top-Box     : Last submission Date and Time: 03 July 2018,13:30  : Download Quotation:  Package No. 47:  Cadence Software : Last submission Date and Time: 10 July 2018,13:30  : Download Quotation:

Past Invitations:

Package No.:1 High speed Machine & Server: Last  submission Date : 21st December, 2017 : Download Quotation: 
Package No.:2 Xerox Machine : Last  submission Date : 21st December, 2017 : Download Quotation 
Package No. : INSTITUTE_DESKTOP : Last Submission Date:16 Jan, 2018 ; Download Quotation
Package No. 39: Digital Copier: Last Submission Date: 22 Jan, 2018 ; Download Quotation
Package No. 9:INSTITUTE_Workstation: Last Submission Date: 24 Jan, 2018 ; Download Quotation
Package No.10 : CNC Machine : Last Submmission Date: 01 March, 2018  : Download Quotation Package No.26 :TEXT : Last Submmission Date: 06 March, 2018  : Download Quotation Package No.40 : Institute SwayamPrabha  Last submmission Date: 21 March, 2018  : Download Quotation Services: Invitation for Internal Auditor: EoI Download (Last Date: 13th June 2018)

Send your SEALED quotations before due date on the following address:

Director, SGGS Institute of Engg. & Tech., Vishnupuri, Nanded, PIN-431606, MAHARASHTRA Past Invitation:
For more information contact :
  • Dr. V.B. Tungikar, TEQIP Procurement Nodal Officer
  • Dr. A.V. Nandedkar, TEQIP Co-ordinator

Committee

TEQIP Unit: Academic Unit: Procurement Unit:
Will be updated soon
Financial Management Unit:
Equity Action Plan 
Sr No Activity Sub-activity/Action Date & duration
1. To identify students who will require more academic support Test for prerequisite of engineering study Towards start of first semester and towards end of second semester
2. To improve language competency, soft skills and confidence levels Arrangement of guest/ Expert lectures on English language. Workshop to improve communication and writing skills January to March 2019
3. To improve non-cognitive and soft skills including communication and presentation skills through their wide use in curricula / project based work, and where needed, to provide special skills training to students with priority to the weak students Soft skill workshops January to March 2019
4. Training of teachers in subject matter and pedagogy, particularly to improve the performance of weak students/ transgender students Teacher’s training at reputed institutes through STTPs and workshops as per TNA. January to March 2019
5. Hold innovation and Knowledge Sharing Workshops yearly to improve knowledge sharing Organizing thematic workshop Academic year 2018-19
6. Sharing information and knowledge about engineering courses and institutions Organize camps at schools in rural areas Academic year 2018-19
7. Peer Learning Groups of students Making of peer learning groups of 10-12 students Academic year 2018-19
8. Appointing Student Mentors and Faculty Advisers for Students Assigning students to faculty adviser. Academic year 2018-19
 

Download

Sr. Item Description(Click Item to Download) Purpose
1. Item Procurement Form To give detailed specifications of the Item to be Procured
2. Training Need Analysis (TNA) Proposal format Training Need Analysis (TNA) Proposal format for Faculty to attend courses/seminars
3. Format for CEP/FDP Proposal for conducting a CEP programme
4. Software Purchase Form Software Purchase
Information Required for 5th JRM               (Click here to download)
1. Autonomy Grant UGC Letter Annex A
2. Agenda of 67th BoM Meeting Annexure I 
3 Minutes of 66th Meeting of BoM Annexure II  
4 Minutes of 65th Meeting of BoM Annex A1_1
5 Minutes of 64th Meeting of BoM Annex A1_2
6 NBA Accreiditation Letter (UG) Annex B
7 NBA Accreiditation Letter (UG) Annex C
8 NBA Accreiditation Letter (PG) Annex D
9. Governance Development Plan (GDP) Annex F
10 Revised IDP for 2016 with updated target indicators Annex G, Annex H
11 TEQIP-III Finance Manual Finance Manual
12 TEQIP-III Procurement Manual Procurement Manual

BoM Minutes During 2017-2018

1 70th BoM Minutes 70th BoM Minutes (9/6/2017)
2 71th BoM Minutes 71th BoM Minutes (4/8/2017)
3 72th BoM Minutes 72th BoM Minutes (02/01/2018)
4 73rd BoM Minutes 73rd BoM Minutes (22/03/2018) (To be uploaded Soon)

Contact Us

Postal Address:
TEQIP-III coordinator,
TEQIP Office,
Administrative Building,
SGGS Institute of Engineering & Technology,
Vishnupuri,
Nanded-431606
Phone: +91-2462-269139