Department of Production Engineering

National Conferences

List of Papers Published in National Conferences

Sr. No.                                                       Details

  1. B.M. Dabade, N. Padamawar, and V.P. Kadam, ” Desidn and Development Of Application Service Provider for Inspection Planning”, At 20th AIMTDR Conf. to be held at BIT, Mesra, Ranchi, 13-15 Dec. 2002. (Under revision).
  2. S.R.Kajale, B.M. Dabade, B.V.S.S.S. Prasad and P.K.Mishra, “Optimization of Laser Drilling Process”, at 18th AIMTDR Conference, IIT Kharagpur, India, 10-12 December 1998.
  3. B.M. Dabade, A.K. Pal, “A Simplified Method Of Work Measurement”, At Third National Convention Of Production Engineering on ‘Industrial Engg. Techq. in product manufacturing’ , Jabalpur on 17-19 Oct. 1987.
  4. B.M. Dabade, N.S. Das, “Fuzzy Clustering Of Forgings- An Application to Forging Part Classification”, At 14th AIMTDR Conf. 19-21 Dec., 1990, I.I.T. Bombay.
  5. B.M.Dabade, N.S. Das, ” Fuzzy Clusters- An Application to Forging Part Family Formation”, At 7th ISME Conf. On Mechnical Engg. And seminar on R&D Needs of Indian Industries’, At I.I.T., Delhi.
  6. B.M. Dabade, S.S.Mahpatra, and P.K. Ray, “TQM and ISO-9000: Some Issues”, At all India Seminar On Quality Management and Reliability, at B.E.College Howarh, April 11-12, 1996
  7. S. B. Sharma, R.C.Agarwala and V.Agarwala, “Synthesis of Electroless Composite Coating by Use of Co-Precipitation Reaction”, National Conference on World Class Manufacturing” held in May, 2003 at Amurita Institute of Technology, Coimbatore, India.
  8. R. C. Agarwala, V. Agarwala and S. B. Sharma. “ A Study on Electroless Ni-P based Composite Coatings by Co-Deposition of Hard Particles”, Proceedings of National Seminar, Advances in Materials and Processing”, held at Metallurgical and Materials Engineering Dept., IIT, Roorkee during 9-10 Nov., (2001), Edited by S. Ray, S. Singh and S. K. Nath, pp. 172-179.
  9. R. C. Agarwala, V. Agarwala and S. B. Sharma, “ Engineering Surface Preparation by Electroless Nickel based Coating Technology: A Promising Area in Industrial Applications”, Proc. of Institute Industry Interaction Meet on Metal Matrix Composites, held at University of Roorkee, (now Indian Institute of Technology), Roorkee, Oct 9, (1999), pp. 32-40.
  10. S. B. Sharma, V. B. Tungikar and S. R. Kajale, “Restructuring Engineering Education: The Need and Some Intended Strategies”, Proc. of National seminar on ‘Restructuring of Technical Education System for Better Efficiency and Effectiveness’, Held during dec. 5 – 6, 1997 at V. R. Siddartha Engg. College, Vijaywada (India).
  11. P. R. Surdashmukh, S. R. Kajale and S. B. Sharma, “Some Aspects of Mathematical Modelling for Material Removal rate (MRR) in Abrasive Jet Machining (AJM)”, Proc. IX ISME Conference on Mechanical Engineering, Nov. 10-11, 1994, University of Roorkee, Roorkee (India), pp. 829-31.
  12. N. M. Khandre and S. B. Sharma, “Effect of Hardness in Electro Discharge Machining of Steels, Accepted for presentation at First National Conf. on Developments and Challenges in manufacturing Engineering 2004 (NCDCM 2004), held during 18-20th March, 2004 at Manipal Institute of Technology, Manipal, India.
  13. S. S. Deshpande and S. B. Sharma, “EDM Optimization for Material Removal Rate and Surface Finish for Plain Carbon Steels”, Accepted for presentation at First National Conf. on Developments and Challenges in manufacturing Engineering 2004 (NCDCM 2004), held during 18-20th March, 2004 at Manipal Institute of Technology, Manipal, India.
  14. S. B. Sharma, “CAD-CAM / CIM and its Relevence to Compitative Industrial Development”, Presented as an invited paper at National Conference on Recent Trends in CAD/CAM, held at GND College of Engineering, Bidar, India; during 29-30 July 2004, pp. 114-117 of the proceedings.
  15. 15.S. S. Deshpande and S. B. Sharma, “Carbon Content Responsive Performance During Electro-Discharge Machining of  Plain Carbon Steels”, Communicated for 21st AIMTDR, to be held at Vellore Institute of Technology, Vellore, India.
  16. 16.K. Dhande and Sunil Sharma, “Ergonomics improves the good economics”, proc. of National conf. on ‘Innovations in Mechanical Engg.’, 29th – 30th March, 2007; PP 71-75.
  17. 17.S. B. Sharma, R.C.Agarwala and V.Agarwala, “Synthesis of Electroless Composite Coating by Use of Co-Precipitation Reaction”, proc. of  National Conference on World Class Manufacturing”,  held at Amurita Institute of Technology, Coimbatore, India, during7-9 March, 2003; Allied zPublications, pp 70-75.
  18. Ashish Dighewar, S. B. Sharma, Md. Ayaz Afser, A. M. wankhede, “ A Comutational Fluid Dynamics Analysis of two stroke I. C. engine”, National Conference on Product Engineering, held at SGGS Instititute of Engg. And Tech., Nanded, Allied Publisher, ISBN: 978-81-8424-646-9 2010, pp19-24.
  19. S. A. H. Quadri and S. B. Sharma, “ Hybridisation of Electrochemical Machiningusing suspended Abrasive electrolyte”, National Conference on Product Engineering, held at SGGS Instititute of Engg. And Tech., Nanded, Allied Publisher, ISBN: 978-81-8424-646-9 2010, pp90-93.
  20. R. B. Mane, M. K. Rodge, S. B. Sharma, “ Optimization of process parameters in WEDM of Aluminium”, ” National Conference on Product Engineering, held at SGGS Instititute of Engg. And Tech., Nanded, Allied Publisher, ISBN: 978-81-8424-646-9 2010, pp94-97.
  21. R. K. Rao, S. P. Sharma, S. D. Lahane, R. S. Bagul, M. K. Rodge and S. B. Sharma, “ Study of effect of process parameters on wire wear during machining of aluminium”, National Conference on Product Engineering, held at SGGS Instititute of Engg. And Tech., Nanded, Allied Publisher, ISBN: 978-81-8424-646-9 2010, pp106-109
  22. R. S. kamble, S. S. Sarpate, M. K. Rodge and S. B. Sharma, “Research status of wire electrical discharge machining process” National Conference on Product Engineering, held at SGGS Instititute of Engg. And Tech., Nanded, Allied Publisher, ISBN: 978-81-8424-646-9 2010, pp126-134.
  23. K. K. Dhande, and S. B. Sharma, “Ergonomic consideration in process industry to improve productivity: A case study of textile industry”, National Conference on Product Engineering, held at SGGS Instititute of Engg. And Tech., Nanded, Allied Publisher, ISBN: 978-81-8424-646-9 2010, pp151-160.
  24. V. B. Tungikar, M.M. Pawade, S.R. Kajale, “Finite element modeling of temperature in rectangular composite laminate”, Proceedings of Int. Conf. On IFAMS 2000, Coimbatore, Jan. 2000, pp. 413-20.
  25. V. B. Tungikar, R.R. Bhanose, K. Narasimhan and V.S. Raja, “Prediction and validation of potential distribution in a galvanic cell”, Proceedings of Int. symposium on materials ageing and life management, Kalpakkam, Oct. 2000, pp. 925-30.
  26. V. B. Tungikar and K.M. Rao,  “Analysis of finite, rectangular composite laminate under combined loading”, Proceedings of Int. Conf. On Signals, data and system, Hyderabad, 1994, pp. 3-16.
  27. V.B. Tungikar, J.P. Hothi and S.B. Sharma, “Finite element formulation for assessing contribution of non-linear strain terms on the analysis of laminated composite plates”, Proceedings of the 22nd  AIMTDR conference at I.I.T. Roorkee, December 21-23, 2006, pp 253-258.
  28. V. B. Tungikar, R.R. Bhanose etal., “Modeling of a galvanic corrosion system”, Proceedings of Int. Conf. On corrosion control, New Delhi, Dec. 99, Vol. 1, pp. 42-51.
  29. V. B. Tungikar, S.M. Salodkar, “Thermoelastic deformation analysis of sandwich composite laminate by finite element method”, Proceedings of national conference on Advanced trends in Mech. Engg. Research and Dev. , Anantpur, June 2000.
  30. V. B. Tungikar, S.K. Basu, S.R. Kajale and G.D. Rathod, “ Finite element modeling of transient thermal stresses in layered composites”, Proceedings of 16th national convention of production engineers, Jan. 2002, pp. 260-265.
  31. V. B. Tungikar, S.R. Kajale and S.K. Basu., “Free vibration analysis of laminated composite plate by finite element technique using non conforming elements”, 20th AIMTDR conference Ranchi, December 13-15, 2002, pp 145-151.
  32. V.B. Tungikar and S.K. Basu, “Finite element analysis of Laminated composite structures for transient thermo-elastic response”, Proceedings of the 21st AIMTDR conference at Vellore, December 20-22, 2004, pp 791-797.
  33. Keshav Rajmore and Jonnalagedda V. L. Venkatesh, Modelling Workflow Activities for Collaborative Design, National Conference on Product Engineering (NCPE – 2010), 3rd – 4th December 2010, SGGSIE&T, Nanded
  34. Wankhade Lalit and B. M. Dabade, “Quality success in developing nations: a new paradigm”, 2nd International Conference on Quality, Reliability and Information Technology, 18 – 20 December 2003, New Delhi.
  35. Wankhade Lalit and B. M. Dabade, “Information Asymmetry and Quality Perceptions”, 2nd International Conference on Logistic and Supply Chain Management, 3 – 5 August 2004, PSG – Tech., Coimbatore.
  36. Wankhade Lalit and B. M. Dabade, “System dynamics of information asymmetry: a preliminary exploration”, International conference on soft computing, 28 – 29 May 2004, Bharath Institute of Higher Education and Research, Chennai.
  37. Wankhade Lalit and B. M. Dabade, “System dynamics approach to information asymmetry for product quality: a preliminary structure with an Indian case” Proceedings of 7th International Research Conference on Quality, Innovation and Knowledge Management, 16 – 18 February 2005, Malaysia.
  38. Wankhade Lalit and Dabade B. M., “Perceived quality as an emerging dimension of quality management” Proceedings of 8th International Research Conference on Quality, Innovation and Knowledge Management, 11 – 14 February 2007, New Delhi.
  39. Chanmanwar, Balasubramaniam, Wankhade, Suri, “Microstructure fabrication using WCE and characterization of topology”, AIMTDR, Nov. 2012.
  40. Wankhade L. N and Khandre N. M., “Technical Teachers And Industry- A New Partnership Mode” ISTE Sixth Annual Convention, Dec.14-15, 2002, Dr. B. A. T. U. Lonere-Raigad.
  41. Wankhade L. N and Pandit R. U., “Knowledge Society in the era of Information Revolution” ISTE Sixth Annual Convention, Dec.14-15, 2002, Dr. B. A. T. U. Lonere-Raigad.
  42. Wankhade L. N, Pandit R. U., and Khandre N. M., “Managing Information Flow in Industries”, XVI National Convention of Production Engineers and National Seminar on emerging trends in Manufacturing, Jan 19-20, 2002, Banaras Hindu University, Varanasi.
  43. Chanmanwar, Wankhade, Sharma, Nandedkar, “Optimization of ECM parameters for MRR and ROC on tool steel”, SPICON, May 30-June 2, 2012, Mumbai.
  44. M. K. Rodge, Gajjal S. Y. and Quazi T. Z “Computer Aided Process Planning for Prismatic Components”, National Seminar on Modern methods for Economic and Quality Production (sponsored by AICTE, New Delhi), Feb 10 –11, 2001 at Gramin Polytechnic, Vishnupuri, Nanded.
  45. Prof .M.K.rodge “Optimization of process parameters in WEDM of Aluminium”, NCPE ,Dec 2010 at SGGSIE&T Nanded
  46. Prof .M.K.rodge “Study of effect of process parameters on wire wear during machining of aluminium”, NCPE ,Dec 2010 at SGGSIE&T Nanded
  47. Prof .M.K.rodge “Research status of wire electrical discharge machining process”, NCPE ,Dec 2010 at SGGSIE&T Nanded
  48. Sayad Ashfac S. V. Ali, M. K. Rodge, Shaikh Afzaluddin and S. A. H. Qadri,   “Optimization of Machining Parameters for Single Pass Turning Operation by Using Goal Programming”, National Seminar on  Modern methods for Economic and Quality Production (sponsored by AICTE,  New Delhi), Feb 10 –11, 2001 at Gramin Polytechnic, Vishnupuri, Nanded .
  49. Rodge M. K. and A. S. Deshpande, “Modern Techniques in Deep Drawing”, IX ISME Conference on Mechanical Engineering, Nov 10 – 11, 1994 at Dept. of Mechanical and Industrial Engineering, University of Roorkee, Roorkee.
  50. M. K. Rodge, L. M. Waghmare and B. M. Patre,  “Scope of Industrial Engineering in Entrepreneurship”, National Seminar on Role and Responsibilities of Technical Education Institute in Innovation and Entrepreneurship, Jan 20 –21, 1990 at S.G.G. S. College of Engineering and Technology, Vishnupuri, Nanded.
  51. R Kabilan and M. K. Rodge, “How to Promote Farming Entrepreneurship in Backward Areas”, ISTE National seminar on Technical Entrepreneurship, March 12 – 13, 1994, at S. G. G. S. College of Engineering and Technology, Vishnupuri, Nanded.
  52. Wankhade L. N and Khandre N. M., “Technical Teachers and Industry- a New Partnership mode” ISTE Sixth Annual Convention, Dec.14-15, 2002, Dr. B. A. T. U. Lonere – Raigad.
  53. Wankhade L. N, Pandit R. U., and Khandre N. M., “Managing Information Flow in Industries”, XVI National Convention of Production Engineers and National Seminar on emerging trends in Manufacturing, Jan 19-20, 2002,Banaras Hindu University, Varanasi.
  54. N. M. Khandre and S. B. Sharma, “Effect of Hardness in Electro Discharge machining of Steels”, National Conf. On Developments and challenges in Manufacturing Engineering 2004, held at Manipal Institute of Technology, Manipal during 18-20 March, 2004, pp. 858.
  55. N. M. Khandre and S. B. Sharma, “Electro Discharge machining of Steels and effect of its hardness on its performance”, 21st AIMTDR, Dec 20-22, 2004, Vellore institute of technology, Vellore.
  56. Khandre N. M and Girish Allampallewar., “Composites: Future Material for Turbine Blades” First National Conference on product engineering (NCPE – 2010), 3rd – 4th December 2010,S. G. G. S. Institute of Engineering & Technology, Nanded (MS), INDIA
  57. Khandre N. M and Aniket Gundale., “Team center Gateway for SAP” First National Conference on product engineering (NCPE – 2010), 3rd – 4th December 2010,S. G. G. S. Institute of Engineering & Technology, Nanded (MS), INDIA.